-
Similar Content
-
By hashes02
Install Ubuntu Desktop Environment (Xfce):
sudo apt update
sudo apt install ubuntu-desktop
Install XRDP(used to connect via Remote Desktop Connection):
sudo apt install xrdp
Install Slim:
sudo apt install slim
Configure XRDP to use Xfce (Ubuntu Desktop Environment):
- Edit the XRDP configuration file:
sudo nano /etc/xrdp/xrdp.ini
- Find the section [Xrdp1] and add the following line below it:
. /etc/X11/Xsession
Restart XRDP:
sudo systemctl restart xrdp
Configure Slim to start Xfce:
Edit Slim configuration file:
sudo nano /etc/slim.conf
Find the line sessions and make sure it looks like this:
sessions startxfce4
Restart Slim:
sudo systemctl restart slim
Install WINE to run the Windows files:
sudo apt update
sudo apt install wine
Run this if u want to change settings:
winecfg
How to install the server:
---------------------------------------------------------------------
1. Download Server Files Try R63 first, if not work for you - try R60 and then R58
2. Download Server Launcher
3. Register your server here
4. Run ZServer.exe
wine ZServer.exe
5. In ZServer add server exe and set params to this
-zlogin changeMe -zpass changeMe -GamePort 25200 -RemoteAdminPort 0.0.0.0:48000 -Country EU -Region EU -serverInstancePath "ZEXEPATHZ/Instance" -PingSite ams -DisplayAsserts false
zlogin and zpass - from step 3.
-
By thetruestarr
HOW TO CREATE A BATTLEFIELD 3 SERVER UNDER LINUX
Requirements:
Ubuntu based Distro (Tested on Ubuntu Server 14.04 and Linux Mint Cinnamon), otherwise my commands wont work! Basic knowledge about the Linux System Atleast a Dual Core Cpu (2 Cores!) 1GB RAM Minimum Root Access VNCSERVER with GUI (if you work on a remote Linux Server) 20GB HDD Space
I GIVE NO WARRANTY ABOUT YOUR SERVER! YOU ARE THE ADMIN OF YOUR SERVER AND IT IS YOUR JOB TO SECURE YOUR DAMN SERVER!
What should i do ?
First be sure you updated your Linux to the last Version you can get. Just in case I used Linux Mint 17.2 Cinnamon 64 Bit in my Tutorial. Commands and downloads are the same as Ubuntu Server/Client.
First of all, open a Terminal Window, duh!
Add Wine as PPA Repo (confirm the command with your root password & press enter!)
sudo add-apt-repository ppa:ubuntu-wine/ppa After you added the new PPA Repo, you must update your Filelist. You can do this with:
sudo apt-get update After the Update ( should not take so long ), you can install Wine 1.7:
sudo apt-get install wine1.7 Now set the Winearch to 32 Bit and setup it:
WINEARCH=win32 winecfg If you get a popup saying you need Wine Mono, install it just in case! Same goes for Wine Gecko!
Now you should see a "Wine configuration" Window. Go to the Dropmenu at the Bottem where it says "Windows Version" and set it from Windows XP to Windows Server 2008 r2.
Apply the Settings and close the Window. Now we need a little handy tool named winetricks, install it as following:
sudo apt-get install winetricks Now start winetricks, just type winetricks and hit enter. Now you should see a popup window of Winetricks. Select the default wineprefix and click ok.
After this click on "Install a Windows DLL or component" and hit ok. Now you should see a big list of Packages. You need to tick the following:
cmd d3dx10 d3dx11_42 d3dx11_43 d3dx9 d3dx9_26 d3dx9_28 d3dx9_31 d3dx9_35 d3dx9_36 d3dx9_39 d3dx9_42 d3dx9_43 d3dxof devenum dinput dinput8 directx9 dotnet20 dotnet30 dxdiag dxdiagn quartz vcrun2008 vcrun2010 If you get some error messages during install, retry it. At the installation of Dotnet30 you get asked to download it. Place the downloaded file into the opened folder.
Ok the wine part is mostly done!
Now copy the BF3 Server folder to:
/home/YOUR USER/.wine/drive_c/ Now you can start the LauncherServer.exe with rightclick -> Open with Wine Windows Program Loader. Now you should see the oldschool serverlauncher
To be sure, that every .exe is opened by wine, do right click -> properties -> open with -> Wine Windows Program Loader -> Set as default.
Now right click your StartServer.bat and open it with Wine Windows Program Loader. Now you should see a CMD Window quickly flashing. After some seconds your Server should start and connect to master
Now you are done
If you need help in Basis Battlefield 3 Server, you should read the How to by Despo :P
The Server supports Punkbuster too without any problems. You can connect to the server via rcon with Procon, but just for your Mind: Procon is not supported for Linux or Wine either! So be careful!
You can use www.bfrcon.com its free and easy to use :P
-
By Apmatupa
Всем добрый день. (мучаюсь уже неделю!!)
Искал решение своего вопроса на форуме - не нашел.
Итак.
Операционная система на машине - Ubuntu 14.04.
Поставил PlayOnLinux 4.2.2.
Устанавливаю Через него BF3, затем ставлю DLC. Когда все установилось делаю следующее:
Качаю с сайта актуальный .dll, Лаунчер и BF3 клиент\BF3 client 6.3.0 (Все файлы и архивы указанные на этой странице (http://zlogames.ru/index.php?showtopic=2143%C2%A0)).
Заменяю.
Запускаю лаунчер.
Указываю свой почту и пароль от ZLOemu -> вижу список серверов.
Выбираю сервер. Нажимаю кнопку "Run client" и появляется окно активации игры. Ввожу свой логин и пароль (те же, что и для лаунчера), а он мне и отвечает "Неверный адрес или пароль"
Как быть? Что делать? Кто запускал баттлу 3 на убунтах - поделитесь опытом.
Всем спасибо.
-
-
Recently Browsing 0 members
No registered users viewing this page.
Recommended Posts